Category ""
ADVERTISING
Word用了这么多年，但是好多同学也许还不知道怎么在word中输入☑。那么今天就跟大家分享一下在word中输入☑的三种小技巧吧。
Low and behold, there was one just the right diameter and length that in my tiny mind seemed just right for the job. My thinking is, get the two piece nut for the X axis and install them with the spring in-between to maintain Zero backlash everywhere on the length of the screw regardless of regional wear.
I spotted his electronic repeat-o-meter video, and a few other videos from others, showing simpler, more mechanical designs, but still with a design using a flexure. Interesting that you thought that using a DTI, and omitting the flexure part, when having a less demanding requirement for detection, may be sufficient.
1、摄像头默认的IP地址为：192.168.1.64，是一个私有地址;首先我们将摄像头用网线连接电脑，再将电脑IP地址设置成192.168.1.x，(x可以是除64以外的数字，比如2)，然后打开浏览器，然后输入192.168.1.64。
MrPete is also often talked about (I love the man*), and to be fair, Joe Pie is also very good (albeit a little click-baity with his video titles), but there's another YouTube machinist teacher who is less well known, but just as good as the others and arguably in some ways better. Take a look at ThatLazyMachinist on YouTube.
Here is link to video of initial axis testing. The Z axis is not powered in this video. I manually drove the spindle down to do a test of X and Y axes.
Thanks for the reply. The mill got there pretty quick I see. The 8 x 12 lathe is shipped by "truck" instead of Fedex so I'm sure it will be a little longer. I plan on getting the moni mill too later. I'm hoping a couple of members with that same lathe will chime in so I can get some idea of what to expect. Thanks again for the reply..
首先需要一个 ed2k 链接，比如我要在 MSDN 网站上下载一个 Office 2013 的安装包。电脑浏览器打开 MSDN 网站，点击网站左侧的【应用程序】，选择【Office 2013】。
I know the x axis ways has the oiler closest to the operator not functioning properly. Please ask me anything that would help you give me some advice on how to quickly fix this mill up. Below is a video of the knocking. It’s obviously much louder in person. Some people said don’t run it this way.