Category ""
ADVERTISING
Depending on the reason for the drawing, Means of Escape for instance, you may use the symbol to show an area to be covered, in accordance with the current British Standard, not the exact location and the symbols below would be acceptable.
Download all CIBSE Standard Symbols currently available below (15MB zip file): Or, download individual packages of CIBSE Standard Symbols using the following links: The Chartered Institution of Building Services Engineers (CIBSE). Registered as a Charity in England No. 278104.
THIS DRAWING TO BE READ IN CONJUNCTION WITH THE ARCHITECTS / ENGINEERS DRAWINGS. ALL WORKMANSHIP & MATERIALS ARE TO COMPLY WITH THE SPECIFICATION, BUILDING REGULATIONS, RELEVANT BRITISH...
The symbols agreed by ISO have been used wherever possible, and additional information (Table 7, Table 8 and Table 9) included as this was within the scope of the 1970 edition.
This standard is available from the following sources:
Gives symbols and abbreviations which enables the location of fire protection equipment to be indicated on a drawing. Wherever possible, an internationally recognised graphic symbol is used.
Gives symbols and abbreviations which enable the location of fire protection equipment to be indicated on drawings. Wherever possible, an internationally recognised graphic symbol is used.
Fire Certificate symbols vary to an amazing degree around the country. The majority use the symbols from the 70's edition of BS 1635 with some additional ones in the same style that were used across the board.
northlandassoc.com DownloadTHESE DRAWINGS ARE FOR BIDDING PURPOSES ONLY. THEY ARE ESSENTIALLY DIAGRAMMATIC TO THE EXTENT THAT MANY OFFSETS, BENDS, UNIONS, SPECIFIC FITTINGS AND EXACT LOCATIONS ARE NOT INDICATED.
Obviously, it’s vital that fire protection drawings (and other architectural drawings and models) use a recognised set of symbols and graphics. They should also come with a key allowing all users to interpret the graphics used and form part of the fire risk assessment.